Select the VCR mode to check the tape contents or input and record video signals from an external source. On the setting menu AUTO SW screen, the mode of the operation to be performed automatically auto iris, auto gain control, When it is tilted in the same direction during playback, the variable speed search mode see page 63 is established, and the Page 14 Parts and their functions ZOOM switch This is used to select motor-driven zoom operations or manual zoom operations.
SERVO: For motor-driven zoom operations At this position, do not attempt to perform manual zoom operations or malfunctioning may result. Page Remote Control Unit Parts and their functions Remote control unit The buttons listed below are for functions which are not featured on the camera recorder.
Page Remote Control Unit Remote control unit Installing the battery While pushing the knob in the direction of the arrow, pull out the holder. OWhen the battery CR has completely run down, replace it with a new one. It is recommended that a spare battery be kept on hand just in case it is needed.
Place the battery flat along the on the AC adapter, and slide it into position. Push the battery straight in, and slide it downward until it clicks into position. Return the viewfinder to its original position. Supplying power from the AC adapter Raise the viewfinder. Push the battery-type connector on the DC cable straight in, and slide it downward until it clicks into position. Page Cassette Tapes Cassette tapes Inserting a cassette tape Do not insert or eject a cassette tape by taking hold of the cassette holder alone.
Insert or eject the tape with the camera recorder placed on a flat and stable surface or, alternatively, support the camera recorder with both hands so that it will be kept in a stable condition even if the cassette holder is opened.
Open the cover, and adjust the strap length. Return the cover to its original position. OEnsure that the cover is closed securely and tightly. Attaching the shoulder strap It is recommended that the shoulder strap be attached to ensure that you do not drop the camera recorder. Page Viewfinders Viewfinders This camera recorder has two viewfinders: a viewfinder that uses a small LCD, and a 3.
Use the one that better suits the application and the shooting conditions concerned. OThe brightness and colour tones may differ between the images in the viewfinder and on the LCD monitor and the images on a TV monitor. Page Setting The Calendar Setting the calendar Presented below is a sample setting where the calendar is set to December 25, and the time is set to PM.
Page Charging The Internal Battery Charging the internal battery The date and time are stored in the memory using the internal battery. Recharge it by following the steps below. Page White Balance And Black Balance White balance and black balance Adjusting the white balance The white balance must always be re-adjusted when the lighting conditions have changed.
Page Adjusting The Black Balance White balance and black balance Adjusting the black balance There is normally no need to re-adjust the black balance. Adjustment is required only in the following cases. OWhen the camera recorder is to be used for the first time OWhen the camera recorder is to be used after it has not been used for an extended period OWhen the camera recorder is to be used in a situation where the ambient temperature will Page Scene Files Scene files The settings selected to suit various shooting situations are stored in the positions of the scene file dial.
During shooting, the required file can be read out in an instant using this dial. The following files were stored as factory settings prior to shipment. In addition, scene files in which changes have been made can be stored in the positions of the scene file dial. Page 37 Scene files The screen shown below appears. Operation method In any operation mode except the shooting mode or recording mode, press the MENU button. When ON is selected, the detail in the skin tone areas is diminished and the graininess of the skin is reduced.
The IRIS button does not work at this time. Camera OFF: Intermittent recording is not performed. Camera When ON is selected as the setting, the beep tone is sounded at the times given below.
O When the beep tone is sounded, the audio signals from the output connectors are muted, and the beep tone is output ND filter display The selected ND filter appears here. Page Shooting Shooting Preparation and inspections Before shooting, check that the camera recorder is operating properly.
Also check that the equipment is set up in a way that is suited to the shooting conditions. Reset the date and time when fully recharged. Connect the AC adapter. Page Regular Shooting Regular shooting Preparation and inspections Ensure that the unit is working properly before you attempt to shoot anything.
Check the equipment you need for the shooting conditions. You can make them appear better by reversing left and right. Press the OIS button to turn the function on and off. Page Backup Recording After backup recording, check the menu item settings before you operate the camera-recorder. For output and recording, the frame-per- second signal is converted to field-per- second interlace.
Page Focus Focus This camera allows you to choose between automatic and manual focusing. Page Adjusting The White Balance Adjusting the white balance When you are shooting in manual mode, readjust the white balance whenever lighting conditions change.
You can also use the preset values. Use the settings to suit the shooting conditions. Page Using Presets Adjusting the white balance continued Using presets Use this feature when you have no time to make white balance adjustments.
If the camera is in auto mode, press the AUTO button to switch to manual focusing out. The current white balance value appears. You can switch the source for each channel between the built-in microphone, another microphone, or audio equipment connected to the camera. When shooting, you can retrieve the necessary file instantly using scene file dial.
Set the same as user information Page Page Variable Speed Search Variable speed search This function enables you to change the playback speed and search for specific scenes. Page Using The Counter Using the Counter Counter display You can display a counter that indicates how much time has elapsed during shooting or playback.
Each time you press the button, the display changes as follows. Page Audio Dubbing Audio dubbing Background music or narration can be added to the images you have recorded on the tape. Connect this unit to a video deck or a television. Connect this unit to a video deck. Page 63 27 Zoom position display The zoom poison is displayed with Z00 maximum wide-angle - Z99 maximum zoom.
Page Using The Setup Menus Using the setup menus Use the setup menus to change the settings to suit the scenes you are shooting or what you are recording. You can also use the menu buttons on the remote control. NORM: Makes colors suitable for a shooting in the open air or in using a halogen lamp as the source of light. ST1: Selects the sound that was recorded during shooting. TIME: Records the current time. DATE: Records the current date. TCG: Records the data from the time code generator.
OFF: the cylinder head pauses and goes into standby mode without cutting the power. Check the connections again. Editing Cannot perform audio dubbing. Displays Something is wrong with the time code display. The remaining tape display differs from the actual amount of tape remaining. Playback images Cannot play back a tape even when I press the play button.
Page Condensation Condensation How to find out if there is condensation inside and what to do about it If the condensation mark has formed inside the camera-recorder. If this hap- pens, the power automatically turns off in few sec- onds. Take the following action. Page Video Heads Video Heads Dirty video heads cause partial mosaic-pattern noise or make the whole display bluish on playback. Page Storage Precautions Storage Precautions Before storing the video camera, remove both the cassette and battery.
Store all of these items in a place with low humidity and relatively constant temperature. Page 87 MEMO This manual is also suitable for: Ag dvxb - camcorder - kp Ag-dvxbp.
0コメント