Vci 400 pdf

So if you go into the Controller Manager in Preferences, in the Device listbox you should see all of your loaded mappings. When you select any of them you should see a setting in the In-Port and Out-Port section. You'll want to make sure that these ports are set correctly for each mapping and if you do have both mapping versions loaded in the Controller Manager at the same time, make sure that the ports are not set for both i.

If that doesn't work thought, let me know. These will correspond to the bottom left 3 buttons on this deck's gratify section. You'll want to do this for all four decks by repeating these steps for each. Then the Gratify effects will trigger the effect types you want. I'm baffled. My guess is that the In-Port is not set correctly.

Are you getting functionality from any of the controls? Just fixed it myself.. Now wondering how to drop the FX sound when button is released. I can still hear an echo of the T3 Delay effect. We moved to a new shop! Sign in to download. Upload an edit of this mapping.

Setup Steps Each time you open Traktor v2. Grid Section Freeze Mode control for each deck Pressing the Grid section button will activate Freeze mode on selected deck All 8 buttons will then light up and control the first 8 slices of freeze mode.

Problem downloading or other issues? Let us know on the forum. Sign in to comment. Jean-Francois Pilotte 12 months ago. Thank you for your hard work! One note for people when importing the. Deleted all but the Flashfooder main and works like an absolute charm! YMG almost 5 years ago. Will this mapping work with Traktor's latest update- 2. If not, will we see an update to the mapping that is compatible?

Nico over 5 years ago. And also do you have any reports on bricking while using the Mac to flash the controller? Tyler about 6 years ago.

Anyone know where I can find the 2. The Sertato site only has it german Show More. Freeze mode is coming in the Grid section replacing the Remix Deck control. If you want anything else please say so in the next day or so before I finish v2. Shuffle Sam about 7 years ago. Any chance we can get that sweet new Freeze mode on the 8 pads somehow? Would be awesome to have Don C. Is there anyway to swap these values? Thanks, awesome job. Kyle Bevan Thompson over 7 years ago.

Kyle Bevan Thompson about 7 years ago. Is there anyway to keep the track playing when you touch the jog wheels? As you know when scratching vinyl, the deck doesn't actually stop just your hand on the record controls how it spins and when you let go it continues on. Currently, once you touch the jog wheel in vinyl mode, the track stops which to me don't feel right at all Pam almost 8 years ago.

New controls for remix decks are awesome! Grant about 8 years ago. Otherwise it's just a loop with no effects. Grant almost 8 years ago.

FitzyP about 8 years ago. Love the new mapping! Unless its somewhere else now? Jonathan Zonta about 8 years ago. It's been a while since your last excellent mapping s.

Any future updates in the works? Kyle Thornton about 8 years ago. Great mapping first off, I really love it. I have a couple questions though, one is I cant get the effects to turn on with the right jog wheel when its in effects mode.

Any way to fix this? Another is the slider and volume effects mode wont work on either deck. I have ver 2. Last question is when i load a song to a deck i noticed the autogain on the track wont change at all.. I checked to make sure the set to autogain is on. Much thanks and happy holidays to you guys :. Nick Murray about 8 years ago. Just got my unit out after not having time to play with it for ages. Running Traktor 2. For Example - On the Echo Freeze - When enabled the Button does not pulse like it used to to indicate the effect is active.

Still very very happy with the Functionality - Just would like to have the lights back. Any ideas on how to cure this issue.? I am no mapping expert and despite looking in the mapping editor - I am still as clueless as ever.

MorrizeN about 8 years ago. Jon-G about 8 years ago. Hey man, great mapping Ive been using it for a while now and Im at the stage where I want to make a few small tweaks so it fits me a little better. Can you give me a heads up please? Tomii almost 9 years ago. Hey brother! I just got done watching your vid for te Makes me wish I had the !! Im curious though. I run a MF 3D and would like to utilize a row or two along with the tilt function in a simular manner as the new jog affects you have on this mapping.

I have your mapping already for the 3D but would like to remove the instant grat since I dont use it. Anyway I can PM you so we can talk. Andrew Erichsen almost 9 years ago. Absolutely love this mapping. One question, looked a bit through the mapping but didn't want to screw anything up.

I am constantly using the effects out of the gratify section, but rarely use the jogwheel effects although they are handy at times and never use the effects in the Cue in the bottom.

What would I need to do to set that back to Cue ? It would be handier for me to have it at the bottom next to cue as opposed to have to constantly click between "Gratify" and "Cues" up top. Thanks in advance! Hey Flash awesome mapping thx!!! One question I have is I've edited your file to suit my needs and one thing I changed was the Quantize button to record.

I would like to have the led on this button flash just like the echo button on the pads once its pushed. I know I can do beatphase but would rather have it blink even if there is no sound so I know it's recording. Any help would be great, thx! Sungwoo Kim almost 9 years ago. For some reason everything else is working fine with me except Macro FX using switch to loop section and Jogwheel when i press button it changes the effect and when i spin it, it changes value.

Jogwheel works fine so I don't think it's the sensitivity setting issue I have re-imported mapping multiple times. Ron Grandia almost 9 years ago. I mix a lot stuff that just doesn't beatgrid. Can't seem to find this - am I missing it somewhere?

Thanks again! Loving this! Thanks so much. Consider adding this to future revs? OK Flash. I slept on this mapping for a bit, but finally did all the updates. Man, this is truly a jammed packed mapping with a tons of features that I've been missing.

I did find one this that others may already have commented on. For the last xFaderFx type, I think that it will only work if you have your FX2 set to a single effect, instead of a group effect. When set to a group effect, you get a weird "delay" turned on. Now, mind you, I am also running a midiFighter3D. So, my plan was just to set FX2 to be a single effect and just deal with it, but the midiFighter Instant Grat takes over FX2 and turns it into a group effect with some of the buttons.

So, I think it would be great if the 4th FaderFX button would switch FX2 to a single effect type and then carry on as usual. I could be crazy, but that's what I'm experiencing. Let me know if there's anything you can do.

If not, the mapping is still sick!!!!! Quick Switch almost 9 years ago. Great work, genius sir! Your history of mappings has truly elevated my music career and performances. FitzyP about 9 years ago. Hey FF, was wondering where in the mapping I could find the option to change which macro effect is used in the lower green button section. Would like to change GranuPhase to WormHole. FitzyP almost 9 years ago. Bhajan about 9 years ago.

Got one more for ya. On a more positive note, the editable FX presets are an answer to my prayers. Thanks Chris!

Appreciate ya brotha! Also, something I noticed since v2. It still works for FX banks 1 and 2, but not for 3 and 4. Pressing the right-hand jog activates the third parameter for FX bank 3 single or group Check it out. You'll see what I mean.

Unless it's something screwy with my respective Traktor config IsaacGriffin about 9 years ago. The effect on this mapping seem to be off. I've used them mostly with tracks that have been properly beat grid and there is what seems like a lag when engaging effect in slicer mode and gratify mode. Not useable at all. Also, when I use the load button for a new track, the track that is playing drops out for a split second.

I don't like that. DJ Barrister about 9 years ago. Hi, so I updated the midi firmware on my VCI, then imported the new mapping twice. Things generally work ok but I'm having issues with LED feedback. I'll press cue 1, 2 but the button does not light up to show I've set the cue. Generally, the pad section has kinks which need to be worked out.

Also, the loop section between cue and jog fx is not working like it used to stutter fx. I'm assuming you removed that, which is a shame, I liked it a lot!

Using TP2. Probably use your 1. Aka about 9 years ago. Minor BUg!?! Hi Flash! Upgraded the FW to v2. Imported twice the tsi. I got this issue: When i press the "gratify" buttons.. Anyone else with this thing? Shuffle Sam about 9 years ago. I hate windows, cannot get this to work.. Im going to try on another PC. But Really im hopeful a mac midi firmware updater gets developed soon.. Rusty about 9 years ago.

ACK is not found". Now my controller doesn't work at all and I am unable to revert to the original firmware either. Not impressed! Getting this running in 2. We have to refilm now because our media got corrupted. We will also likely shoot a setup video too. For now, after loading the mapping you want to move most knobs and faders to reset them correctly. This range can be changed in the Transport section of Preferences.

Hope it helps! Last edited by flashflooder; at PM. Originally Posted by weltraumpapst. Originally Posted by flashflooder. I have not had a chance to test this on a normal unit yet and don't know exactly how the Midi data differs between the normal and SE models. I will try to investigate this in the future if I have time but I figure you and others will probably report on it before then. Did not work.

I am having issues getting my jog wheels to work. The jogfx are definitely messed up. Is this supposed to happen? None of the jogfx are working right. Because mine definitely aren't working properly if so. I've tried loosening them but that hasn't helped. Once I get these jogs working properly I will be ecstatic. If anyone can tell me what I should do I'd appreciate it.